Sinelec Technologies

8.95

Reyax RYWB116

Compliant to single-spatial stream IEEE 802.11 b/g/n, Bluetooth 5.
Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager.
Ultra-low power consumption with multiple power modes to reduce the system energy consumption.
Leading edge RF performance providing long range and higher throughputs.
Transmit power up to +21dBm with integrated PA.
Wi-Fi receive sensitivity as low as -98.5 dBm.
BT receive sensitivity as low as -95 dBm.
Support for Client mode, Access point mode, Wi-Fi Direct and enterprise security.
Support for concurrent Wi-Fi, Bluetooth 5.
8.9 mA transmit current in BT 5 mode, 2 Mbps data rate.
Operating temperature: -40°C to +85°C.
Transmission distance up to 200M.
FCC, NCC Certification.

Title	Date	Download
RYWB116_EN	Feb 28 2022	Download
RYWB116 Evaluation board	Feb 28 2022	Download
RYWB116 Orcad Capture .DSN file	Feb 28 2022	Download
RYWB11x_Embedded_WLAN_Software_Programming_Reference_Manual	Feb 28 2022	Download
RYWB11x_Embedded_BLE_Software_Programming_Reference_Manual	Feb 28 2022	Download
RYWB11x_Embedded_BT_Classic_Software_Programming_Reference_Manual	Feb 28 2022	Download
RYWB116 Client Mode User Guide	Feb 28 2022	Download
RYWB116 Client Mode User Guide_TW	Feb 28 2022	Download
RYWB116 MQTT Client Application User Guide	Feb 28 2022	Download

REYAX’s RYWB116 module provides a comprehensive multi-protocol wireless solution including 802.11 b/g/n, dual-mode Bluetooth 5.
The module is certified by NCC and FCC.

Item	Min.	Typical	Max.	Unit	Description
Operation Voltage	1.75	3.3	3.6	V	VBATT
Imax			400	mA	Maximum Current consumption in TX mode
IPmax			500	mA	Peak current rating for power supply
WLAN Data Transfer Average Current		270		mA	11Mbps Tx
WLAN Data Receive Average Current		48.2		mA	72 Mbps Rx
BR/EDR TX Active Current, 3 Mbps EDR		140		mA	HP chain, Tx Power = Maximum
BR/EDR RX Active Current, 3 Mbps EDR		26.7		mA	HP chain
BLE TX Active Current		190		mA	HP Chain, Tx Power = Maximum (20 dBm)
BLE RX Active Current		26.7		mA	HP chain
WLAN Standby Associated Mode Current		119		uA	DTIM=3 Cisco Aironet AP
WLAN Standby Associated Mode Current		51		uA	DTIM=10 Cisco Aironet AP
Quiescent current		3		nA
Baud Rate	9600	115200	921600	bps
Wireless Protocols					IEEE 802.11b, 802.11g, 802.11n Bluetooth 5 (2.1+EDR, LE, LE 2 Mbp)
Operational Modes Supported					Wi-Fi Access Point with support for up to 16 clients Wi-Fi Client Wi-Fi Direct Bluetooth Classic (EDR v 2.1) Wi-Fi Client + Bluetooth Low Energy
Receive Power			10	dBm
WLAN Modulation					OFDM with BPSK, QPSK, 16-QAM, and 64-QAM 802.11b with CCK and DSSS
WLAN Operating Frequency	2.412		2.484	GHz
WLAN Bandwidth		20/40		MHz
WLAN Data Rates	1 6		11 54	Mbps	802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: MCS0 to MCS7
Bluetooth Channel Spacing	1		2	MHz	BR, EDR, – 1 MHz LE – 2 MHz

Language/Technology	IDE/Compiler	Type	OS	Download
				Download

Name	Part#	Type
DC Power Line Communication (PLC) Reference Design	24VDCPLCEVM	Evaluation Modules & Boards
Three Phase BLDC & PMSM Motor Kit with DRV8301 and Piccolo MCU	DRV8301-HC-C2-KIT	Evaluation Modules & Boards